原油及馏分油脱酸技术进展

石油酸是原油和馏分油中普遍存在的腐蚀性物质，其主要成分为环烷酸并且含量可以高达90%以上。环烷酸具有羧酸的所有化学性质，所以常常造成严重的腐蚀，从而影响原油加工设备及油品使用设备的正常运行和使用寿命。随着近年来世界范围内高酸原油产量的逐渐增加，高原油及各种高酸值馏分油所带来的腐蚀与产品质量问题显得愈发严重，因此迫切需要开发出经济高效的脱酸技术与工艺路线。本文较为全面而详细地总结并评述了国内外原油及油品的各种脱酸技术方法。分析表明：目前所报道的各类脱酸工艺较多，其中工业应用的加氢脱酸效果虽好但是成本较高，而其他大多数脱酸方法都存在较多的缺点或不足，因此探寻一种绿色环保、经济高效并且具有较好普适性的油品脱酸工艺显得非常迫切而必要。酯化法脱酸具有加工工艺简单、不需要复杂的后继处理，几乎可以降低所有的高酸值原油和油品（轻质、重质馏分油以及渣油）的酸值，为原料油的进一步加工提供了方便。酯化脱酸工艺的关键在于高效催化剂的选择，而目前的催化酯化体系虽然脱酸率较高，但仍存在着反应时间较长的不足，相信通过反应过程强化等手段解决该问题以后，催化酯化脱酸工艺会被很快投入到原油及油品的脱酸实际工业生产中去。     

Prospects of inedible plant oil-driven bio-lubricants for tribological characteristics – a review

ABSTRACT

Fossil fuel resource is on the draining stage which leads to an increment in the cost of the petroleum products. Nowadays, research is focused on the development of environmental friendly lubricants which are derivatives of renewable sources. Inedible plant oil-driven bio-lubricants are environmentally friendly because they are non-hazardous, biodegradable, as well as there is no emission of toxic gases. This study involves the characterisations, advantages, as well as utilisation of inedible plant oil-driven bio-lubricants as an alternative for tribological applications. This report presents the status about the global lubricant market as well as potential outlook. Inedible plant oil-driven bio-lubricants bear high viscosity, high lubricity, and high viscosity index which can enhance the equipment service life and has the ability to carry high load and results in minimum amount of metal traces during combustion.     

Study on migration characteristics of heavy metals during oil sludge incineration

Experimental and simulation studies on the migration characteristics of heavy metals during the incineration of OS were conducted with a tube furnace reactor and thermodynamic equilibrium calculation software FactSage, respectively. The results showed that when the incineration temperature increased from 800°C to 1100°C, the release rates of heavy metals such as Cr, Pb, Cu, Zn and Ni increased gradually and reached the maximum at 1000°C. When the excess air ratio increased from 1.0 to 1.4, the release rates of heavy metals such as Cr, Pb, Cu, Zn and Ni first decreased and then became steady. The content of gaseous hydroxide of Cr and gaseous chlorides of Pb and Cu increased while the chemical forms of Zn and Ni did not change obviously with the increase of combustion temperature or excess air ratio.     

液压阻尼孔的宽温度范围流动特性试验研究

研制一种适合对各种液压孔口或缝隙进行高低温流体力学试验的新型试验装置，运用该装置对具有不同几何参数的液压阻尼孔进行在-50~80℃宽温度范围内的流动特性试验，研究以普通抗磨液压油HM46和低温抗凝减振器油TITAN SAF 5045为工质及其温度变化时对液压阻尼孔流量-压力特性曲线、幂指数和流量系数的影响，研究表明，在低温条件下，液压阻尼孔的流量系数均因油液黏度增大、流动性变差而呈线性下降的趋势，从宏观上看，HM46通过液压阻尼孔时的流动稳定性较差，其对应流量系数的下降幅度明显大于TITAN SAF 5045对应的下降幅度，厚壁小孔流量系数的下降幅度明显大于薄壁小孔对应的下降幅度。研究所获得的新型试验装置、试验数据分析方法和具体理论公式为深入研究和优化现代液压元件在宽温度范围内的动态性能提供新型试验平台与理论基础。     

Adaptive neuro-fuzzy algorithm applied to predict and control multi-phase flow rates through wellhead chokes

A Takagi-Sugeno adaptive neuro-fuzzy inference system (TSFIS) model is developed and applied to a dataset of wellhead flow-test data for the Resalat oil field located offshore southern Iran, the objective is to assist in the prediction and control of multi-phase flow rates of oil and gas through the wellhead chokes. For this purpose, 182 test data points (Appendix 1) related to the Resalat field are evaluated. In order to predict production flow rate (Q_L) expressed as stock-tank barrels per day (STB/D), this dataset includes four selected input variables: upstream pressure (Pwh); wellhead choke sizes (D64); gas to liquid ratio (GLR); and, base solids and water including some water-soluble oil emulsion (BS&W). The test data points evaluated include a wide range of oil flow rate conditions and values for the four input variables recorded. The TSFIS algorithm applied involves five data processing steps: a) pre-processing, b) fuzzification, c) rules base and adaptive neuro-fuzzy inference engine, d) defuzzification, and e) post-processing of the fuzzy model. The developed TSFIS model for the Resalat oil field database predicted oil flow rate to a high degree of accuracy (root mean square error = 247 STB/D, correlation coefficient = 0.9987), which improves substantially on the commonly used empirical algorithms used for such predictions. TSFIS can potentially be applied in wellhead choke fuzzy controllers to stabilize flow in specific wells based on real-time input data records.     

三液相酶催化体系水解橄榄油的研究

采用三液相酶催化体系水解橄榄油,考察构成三液相体系的物质对酶的影响;考察了硫酸铵的含量和PEG400的含量对酶的分配分数、回收率及催化效率的影响,研究了中下相与油的体积比对水解橄榄油的影响,并初步探究了三液相体系水解橄榄油的微观液滴结构。结果表明:在酶添加量142.5 U/g、硫酸铵含量15%、PEG400含量28%、中下相与油的体积比3∶1、转速200 r/min条件下,酶的分配系数达到28.28,酶的回收率达99.65%,水解24 h后,脂肪酸含量达98.17%,在对照(油水体系)中,相同条件下产生的脂肪酸含量仅为42.06%。显微镜下液滴观察结果表明,三液相体系中独特的液滴结构可能是该体系优于油水两相体系的原因。     

油封唇口温度变化对密封性能的影响

基于流量因子统计学方法建立油封唇口的混合流体润滑模型,耦合油封的能量守恒方程及黏温方程,通过迭代求解获得油封唇口的温度分布、不同转速下油封唇口的最高温度及温差变化情况;对比分析考虑和不考虑温差情况下油封各项密封性能。结果表明:随着转速的增大,唇口最高温度线性递增,而唇口温差先增大后减小;油封工作时,唇口区域的温度先迅速升高后下降,越靠近唇尖的位置温度越高;与不考虑温度的情况比较,考虑温度变化的影响时密封区域的油膜厚度减小,油膜承载力下降,不利于密封。     

Impact of β-glucan on debittering,bioaccessibility and storage stability of skim milk fortified with shrimp oil nanoliposomes

Shrimp oil was encapsulated in nanoliposomes and fortified into skim milk. Shrimp oil nanoliposomes (SONL) were thermodynamically stable when added into skim milk at 10 mL 100 mL⁻¹. Mild bitterness in fortified skim milk caused by the SONL was masked by adding β-glucan at various levels (0.05–0.2 g 100 mL⁻¹). With the addition of SONL, fortified skim milk appeared more reddish in colour due to the presence of astaxanthin. Addition of β-glucan resulted in the increase in viscosity of the fortified milk by forming network of junction zones. During the storage of skim milk fortified with SONL and 0.1 g 100 mL⁻¹ β-glucan at 4 °C for 15 days, no major quality changes took place. Simulated in vitro digestion studies revealed that 45.41 g 100 g⁻¹ eicosapentaenoic acid (EPA) and 48.86 g 100 g⁻¹ docosahexaenoic acid (DHA) from shrimp oil were bioaccessible for absorption in the gut after digestion.